< Previous | Contents | Next >
Filling a completely empty system
NOTICE! Mix the correct amount of coolant in advance, to ensure that the cooling system is com- pletely filled. Refer to Technical Data page 78 for the correct coolant volume.
Do not start the engine until the cooling system is com- pletely filled and vented.
NOTICE! If a heating unit is connected to the engine cooling system, the heating control valve should be opened and the installation vented during filling.
1 1 Check that all drain points are closed.
2 Open the caps to both the expansion tank (1) and
2 the radiator (2). Fill the expansion tank so that the coolant reaches the MAX mark on the sight glass.
P0019332