< Previous | Contents | Next >

Engine Manufacturer:

AB Volvo Penta

Gropegårdsgatan, SE 405 08 Gothenburg, Sweden

Description of engine 4-cycle diesel engine. Engine types covered by this declaration:

Fundamental health and safety requirements applied to, and fulfilled by, the above-mentioned engines are descri- bed in the following items in Annex I:

1.1.3, 1.1.5, 1.5.1, 1.5.2, 1.5.3, 1.5.4, 1.5.6, 1.5.13, 1.6.1, 1.6.2, 1.6.4, 1.7.1, 1.7.1.1, 1.7.1.2, 1.7.4, 1.7.4 and

1.7.4.3.

The relevant technical documentation is compiled as described in part B of Annex VII.

Relevant information concerning the partially completed machinery will be provided in suitable form upon justified requests from competent national authorities. The individual authorized to compile the relevant technical docu- mentation is the signer of this declaration.

The harmonizing standards applied are:

EN ISO 12100–1: Safety of machinery – Basic concepts, general principles for design – Part 1: Basic terminology. methodology.

EN ISO 12100–2: Safety of machinery – Basic concepts, general principles for design – Part 2: technical princi- ples.

EN 1679–1: Reciprocating internal combustion engines – Safety – Part 1: Compression ignition engines.

The partially completed machinery also complies with the following relevant Directive: 2004/108/EC – Electromagnetic Compatibility (EMC) Directive.

Applied standards: EN 61000–6–1, EN 6100–6–2, EN 61000–6–3, EN 61000–6–4, EN 12895, EN-ISO 14982

and EN 13309.

For engines equipped with the Volvo Penta Start/Stop System the responsibility for the functional safety of the system lies with the machine manufacturer performing the integration.

The engines covered by this declaration may not be put into operation before the completed machinery into which they are to be installed has been declared to conform with the provision of Machinery Directive 2006/42/EC.

< Previous | Contents | Next >