< Previous | Contents | Next >

Electric welding

Remove the positive and negative cables from the batteries. Then disconnect all cables connected to the alternator. Disconnect both connectors from the engine control module.

Always connect the welder ground clamp to the com- ponent to be welded, and as close as possible to the weld site. The clamp must never be connected to the engine or in such a way that current can pass through a bearing.

When welding is completed: Always connect the cables to the alternator and engine control unit con- nector before reconnecting the battery cables.

دیزل ژنراتور | ماشین های راهسازی | لودر | بیل مکانیکی | لیفتراک | موتور پمپ | پمپ آب