Checking oil level sensor
Tools:
885675 Break-out cable
Tools:
88890074 Multimeter
1 NOTICE! Cut the current with the main switch.
2 Connect break-out cable (885675) to the sensor.
Do
not connect the other end of the adapter cable.
3 Use multimeter 88890074 to do resistance meas-
urement.
Measurement points Nominal value
1–2 R ≈ 10 – 14 Ω
NOTICE! Even
if
the nominal value is correct the sen-
sor could be faulty.
Checking supply cable, oil pressure
sensor
Tools:
885675 Break-out cable
88890074 Multimeter
1 NOTICE! Turn ignition off.
2 Remove the connector from the sensor. Connect
break-out cable 885675 between the sensor and
engine control unit.
3 Use multimeter 88890074 for voltage measure-
ment.
4 NOTICE! Turn ignition on.
Measurement points Nominal value
1–4 U ≈ 5 V
885675
2
3
4
5
1
1
2
P0013296
P0001355
30-2 Fault Tracing
47701632 10-2013 © AB VOLVO PENTA 147