< Previous | Contents | Next >

Torque-angle tightening

In torque/angle tightening, the fastener is tightened to the specified torque, and tightening then continues through a pre-determined angle. Example: for 90° an- gle tightening, the joint is turned a further 1/4 turn in one sequence, after the specified tightening torque has been achieved.

دیزل ژنراتور | ماشین های راهسازی | لودر | بیل مکانیکی | لیفتراک | موتور پمپ | پمپ آب