< Previous | Contents | Next >

Check of sensors, camshaft and flywheel


image image


The speed sensors for the camshaft and flywheel are identical. For visual checking, first remove the sensor from the engine. Then remove the connection block and check that the sensor is not damaged and that no swarf/filings have stuck to the sensor.

The induction test is performed as follows:

1. Set multimeter 9510060 to resistance measure- ment. Measure with the multimeter on the connec- tion pins. The resistance should be within 775–945 Ω.

2. Pass a metal object quickly and closely by the sensor. Check that the multimeter reacts. When replacing and installing sensor, make sure that any spacing shims are refitted.


دیزل ژنراتور | ماشین های راهسازی | لودر | بیل مکانیکی | لیفتراک | موتور پمپ | پمپ آب