< Previous | Contents | Next >

Check of sensor, coolant level


image image


1. Empty the expansion tank from coolant.

image WARNING! NEVER open the expansion tank pressure cap when the engine is hot, hot coolant can be sprayed out and cause severe burns.

2. Release the connector block from the coolant level sensor.

3. Check that the switch is activated and that it sends a signal when the expansion tank is empty.

4. Then fill the expansion tank with coolant and check that the resistance is infinite.


دیزل ژنراتور | ماشین های راهسازی | لودر | بیل مکانیکی | لیفتراک | موتور پمپ | پمپ آب