7 Remove the injector by inserting an 8-9 mm drift
in the yoke.
Move the drift towards the inlet manifold, to lever
the injector out.
Plug the hole (Plug: 885 510).
NOTICE! Make sure the sealing washers are also
removed.
Installation
8 Install the new injectors together with yokes.
NOTICE! Do not press directly on the connector
screws, but on the plastic between them. Use
new copper washers.
9 IMPORTANT!
Carefully wipe away combustion residue from cyl-
inderhead orifices before installing the injectors.
Vacuum dirt particles away.
Always use a new O-ring and a new washer.
23-7 Injectors and Delivery Pipes
7747622 12-2014 © AB VOLVO PENTA 185

دیزل ژنراتور | ماشین های راهسازی | لودر | بیل مکانیکی | لیفتراک | موتور پمپ | پمپ آب