3 Check that the tap, tool 9809668 Extractor (M9)
is fitted to tool 88800191 Extractor.
Replace the existing counterhold in the tool with
4 Screw the tool all the way to the bottom of the
copper sleeve. Remove the copper sleeve by
turning the nut while holding the pin secure.
5 NOTICE! 88800190 Sleeve must be used to pre-
vent dirt from getting into the fuel duct.
Clean the bottom of the cylinder head with the aid
of tools from 9998599 Cleaning kit.
23-7 Injectors and Delivery Pipes
192 7747622 12-2014 © AB VOLVO PENTA