Oil pan, installation
31 Clean the gasket surfaces from gasket residue.
Apply liquid gasket (part # 11 61 771).
Install the oil pan; tighten the bolts in the
sequence illustrated.
Torque to: 30 Nm
32 Clean the mating surfaces.
Fit the belt pulley and the oscillation damper. Use
tool 8880 0014 as a counterhold.
NOTICE! The oscillation damper bolts may notbe
re-used.
Tighten in three steps:
Step 1 30 (±5) Nm
Step 2 angle tighten 60°
Step 3 angle tighten 60°
33 Oil the camshaft and its bore in the engine block.
Position all valve lifters (lightly oiled); use mag-
netic pen 885 822.
21-0 Engine Complete, General
7747622 12-2014 © AB VOLVO PENTA 95

دیزل ژنراتور | ماشین های راهسازی | لودر | بیل مکانیکی | لیفتراک | موتور پمپ | پمپ آب